Acoustic Pressure, Particle Motion, and Induced Ground Motion Signals from a Commercial Seismic Survey Array and Potential Implications for Environmental Monitoring

Abstract

An experimental marine seismic source survey off the northwest Australian coast operated a 2600 cubic inch (41.6 l) airgun array, every 5.88 s, along six lines at a northern site and eight lines at a southern site. The airgun array was discharged 27,770 times with 128,313 pressure signals, 38,907 three-axis particle motion signals, and 17,832 ground motion signals recorded. Pressure and ground motion were accurately measured at horizontal ranges from 12 m. Particle motion signals saturated out to 1500 m horizontal range (50% of signals saturated at 230 and 590 m at the northern and southern sites, respectively). For unsaturated signals, sound exposure levels (SEL) correlated with measures of sound pressure level and water particle acceleration (r2= 0.88 to 0.95 at northern site and 0.97 at southern) and ground acceleration (r2= 0.60 and 0.87, northern and southern sites, respectively). The effective array source level was modelled at 247 dB re 1µPa m peak-to-peak, 231 dB re 1 µPa2 m mean-square, and 228 dB re 1 µPa2∙m2 s SEL at 15° below the horizontal. Propagation loss ranged from −29 to −30log10 (range) at the northern site and −29 to −38log10(range) at the southern site, for pressure measures. These high propagation losses are due to near-surface limestone in the seabed of the North West Shelf.

Bibliographic Information