Pressure Fluctuation Characteristics of a Pump-Turbine in the Hump Area under Different Flow Conditions

Abstract

During the operation of a reversible pump-turbine, a hump area can easily appear under the pump condition, which will greatly affect the performance of a storage unit, with pressure pulsation being the key factor for the stable operation of a pump-turbine. Therefore, in order to explore the pressure pulsation characteristics of each flow component in the hump area, this paper first compared the full characteristics of the model test under different working conditions, and then it analyzed the pressure pulsation characteristics. By analyzing the pressure pulsation characteristics in the unit’s flow component under different flow rates in the hump area, the pulsation rule of a pump-turbine running in the hump area was revealed. It was found that the peak-to-peak value of the draft tube in the hump area was the smallest under the optimal flow condition, and the peak-to-peak value increased along the flow direction, with the rotor and stator interaction (RSI) effects being continuously enhanced. When away from the runner basin, the influence of RSI gradually weakened after leaving the runner. No low frequency was found in the optimal traffic. The peak-to-peak value of the low flow condition increased compared with the optimal flow condition, and the distribution was not uniform. The main frequency of the whole basin was relatively complex, indicating that the flow of water was unstable in the condition of partial load, resulting in the hump area during the unit operation. The research results can provide a theoretical reference for improving the stability of pump-turbines.

Bibliographic Information