Effect of a Compression Ratio Increase and High-Flow-Rate Injection on the Combustion Characteristics of an Ammonia Direct Injection Spark-Ignited Engine

Abstract

Despite efforts to use ammonia as a fuel, there remain problems with low combustion speeds and high unburned ammonia (NH3) emissions. Therefore, methods to compensate for slow combustion speeds and stabilize combustion have been studied. This study aims to analyze how increasing the compression ratio affects engine performance to enhance thermal efficiency and reduce unburned emissions in a high-pressure ammonia direct injection spark-ignited engine. In addition, by applying a high-flow-rate (HFR) injector, an improvement in the combustion of ammonia fuel and exhaust gas emissions is observed through changes in the air–fuel mixture formation of high-pressure directly injected ammonia fuel. Compared with the existing compression ratio, the incomplete combustion loss due to unburned NH3 increases significantly, and the thermal efficiency does not increase under an increased compression ratio. When HFR injectors are applied with an increase in the compression ratio, the net work increases by 4.7%, as incomplete combustion and energy losses of fuel are reduced by reducing the amount of unburned NH3.

Bibliographic Information