CFD-Based Parameter Calibration and Design of Subwater In Situ Cultivation Chambers Toward Well-Mixing Status but No Sediment Resuspension

Abstract

The elemental exchange fluxes at the sediment–water interface play a crucial role in Earth’s climate regulation, environmental change, and ecosystem dynamics. Accurate in situ measurements of these fluxes depend heavily on the performance of marine incubation devices, particularly their ability to achieve full mixing without causing sediment resuspension. This study presents a novel parameter calibration method for a marine in situ incubation device using a combination of computational fluid dynamics (CFD) simulations and laboratory experiments. The influence of the stirring paddle’s rotational speed on flow field distribution, complete mixing time, and sediment resus-pension was systematically analyzed. The CFD simulation results were validated against existing device data and actual experimental measurements. The deviation in complete mixing time between simulation and experiment was within −9.23% to 9.25% for 20 cm of sediment and −9.4% to 9.1% for 15 cm. The resuspension tests determined that optimal mixing without sediment disturbance occurs at rotational speeds of 25 r/min and 35 r/min for the two sediment depths, respectively. Further analysis showed that the stirring paddle effectively creates a uniform flow field within the chamber. This CFD-based calibration method provides a reliable approach to parameter tuning for various in situ devices by adjusting boundary conditions, offering a scientific foundation for device design and deployment, and introducing a new framework for future calibration efforts.

Bibliographic Information