Abstract
This study presents a simulation-based evaluation of a wall-following and mapping framework for autonomous underwater vehicles (AUVs) equipped with a single-line laser, targeting structured environments such as rectangular tanks and dam interiors. A hardware-in-the-loop (HIL) simulation platform is developed to integrate sensor emulation, vehicle dynamics, and image-based control while preserving the onboard data formats, update rates, and communication protocols of the AUV system. Using a single camera–laser pair, the framework estimates yaw angle and lateral wall distance from laser image geometry to support real-time wall-following and frontal obstacle avoidance. Wall mapping is performed by transforming laser image features into spatial coordinates and estimating the dimensions of geometric protrusions. The framework is evaluated on simulated walls with protruding features under two navigation conditions: ideal-motion and dynamic-control operation. Simulation results show stable wall-following performance, with lateral distance errors typically below 0.1 m. Under ideal-motion conditions, mapping errors range from 1% to 13%, while under dynamic-control navigation they increase to 10–35% due to attitude fluctuations and control-induced motion. Frontal obstacle avoidance maintains a minimum clearance of 1.04 m. The results demonstrate the feasibility of using a single-line laser and a unified image stream for both real-time wall-following control and post-mission geometric mapping within the defined simulation conditions. While the evaluation is limited to simulation and assumes idealized optical conditions without modeling hydrodynamic disturbances or optical degradation effects, the framework provides a system-level reference for laser-guided inspection strategies in confined underwater environments such as tanks, reservoirs, and dams.