Investigation on the Mechanical Behavior of Coastal High-Speed Railway Box Girder Under Tsunami Waves

Abstract

With the large-scale construction of coastal high-speed railways, understanding the mechanical behavior of high-speed railway box girders under tsunami waves has become increasingly important. Existing studies on tsunami-induced forces on bridge girders have mainly focused on T-girders and plate-girders in highway bridges. In contrast, research on high-speed railway box girders, which are characterized by a significant height-to-width ratio, large cantilevers, and complex ancillary facilities on the girder top, remains relatively scarce, especially regarding its behavior under tsunami waves and the effects of lateral displacement on its dynamic response. In light of this, this study focuses on the investigation of the mechanical behavior of a single-track high-speed railway box girder under tsunami waves, and fifth-order solitary waves and dam-break waves are comparatively employed to simulate the typical unbroken and broken tsunami waves. The interaction between tsunami waves and the fixed railway box girder is numerically conducted, and the characteristics of the interaction process and the variation in maximum forces with girder clearance are thoroughly investigated. After that, the numerical interaction between tsunami waves and the laterally movable railway box girder is comparatively carried out, and the lateral displacement effects on the girder wave forces are exhaustively investigated. The results indicate that unbroken and broken tsunami waves exhibit distinctly different interaction processes with the box girder. With decreasing girder clearance, for the unbroken wave, the maximum horizontal and vertical forces occur when the girder bottom and the cantilever root descend to the initial water surface, respectively; for the broken wave, the horizontal and vertical forces simultaneously occur when the girder bottom nears the water surface with a small clearance. Lateral displacement can reduce wave forces on the girder, but the reduction is quite limited—remaining below 10% at the reference stiffness of an actual bearing. It validates that using a fixed girder model to estimate wave forces on an actual laterally movable girder is a slightly conservative and reasonable approach. This study provides further insight into wave forces acting on coastal high-speed railway box girders in tsunami-prone areas.

Bibliographic Information