Abstract
Underwater towed survey systems are widely used for marine observation, resource exploration, and target identification. While high-speed towing is increasingly required to improve operational efficiency, conventional single-stage towed systems face a critical trade-off: active heave compensation systems are complex and costly, whereas purely passive configurations lack sufficient disturbance rejection at higher speeds. To address this gap, this study proposes a two-stage towing system consisting of a vessel, heavy cable, depressor, light cable, and detection towed body, where the depressor functions as a mechanical low-pass filter. The depressor reduces vessel-induced heave motion transmission by approximately 79% compared with a conventional single-stage system. CFD simulations are conducted to evaluate hydrodynamic performance and extract key coefficients. A lumped-mass dynamic model is established for time-domain motion simulations. An integral sliding-mode controller with vessel heave feedforward compensation is designed to enhance depth-tracking capability. The active controller eliminates step response overshoot and provides robust depth regulation under wave disturbances. Sea trials under real ocean conditions validate the system’s motion stability, demonstrating satisfactory depth-keeping performance at high towing speeds. The simulation results show good agreement with experimental data, confirming the effectiveness of the proposed system and dynamic model. This work offers a practically validated towing platform solution for high-precision underwater survey operations.