Abstract
The dynamic characteristics and buffeting response of long-span single-pylon cable-stayed bridges are not fully understood after cable failure occurs in coastal wind environments. This study investigates how the location, number, and pattern of cable failures affect structural performance. A three-dimensional finite element model of a 280 m main-span bridge was established using the aerodynamic coefficients extracted from wind tunnel tests. Modal analyses and nonlinear time-domain simulations were conducted. The results show that frequency reduction concentrates in lower-order vertical bending modes, with the first and second modes being the most sensitive. Variations in frequency are closely related to the failure location of stay cables, with the largest reduction at the mode antinode. Unilateral multiple failures induce bending–torsion coupling, whereas symmetric bilateral failures only lower frequencies. Under wind loads, the failure of stay cables results in the redistribution of static internal forces, primarily to the adjacent stay cables on the same side. This phenomenon is enhanced as the number of failed cables increases. The change in buffeting internal forces results in a non-monotonic trend, and the shorter cables near the pylon are more sensitive. Cable failure, which occurs at different phases of the buffeting process, significantly influences the structure's transient response. The scenario in which the structure is subjected to wind loads after cable failure results in the largest variation amplitude.