Assessment of Membrane and Electrochemical Technologies for the Treatment of a Selenium-Bearing Mine water: Technology Performance and Effect on Toxicity and Bioaccumulation

Abstract

Nanofiltration (NF), reverse osmosis (RO), electrodialysis (ED), and electrocoagulation (EC), were all tested at the bench scale for removing selenium (Se) from mine water. All of these technologies reduced the concentration of total Se from 216 µg/L (i.e. 120.1 µg/L of selenate; 59.1 µg/L of selenite, and 0.6 µg/L methyl-selenic acid) in the raw mine water to about 2 µg/L or less in the treated water, equivalent to more than 99% removal. Electrodialysis was found to be the most effective, removing more than 99.5% of the Se. The untreated mine water was toxic to algae. In contrast, RO and NF reduced the toxicity of the mine water, allowing algae to grow between 15,000 to 25,000 cells/mL, while ED and EC did not allow algal growth, likely due to complete removal of essential minerals (ED) or the presence of other contaminants (EC), such as copper. The Se speciation did not change as a result of membrane filtration; however, selenite in the effluent was almost fully transformed to selenate in the brines from the ED and EC treatment processes. The effluent treated by NF and EC generated seleno-cyanate at 0.37 and 1.01 µg/L, respectively. Further testing is recommended at the pilot-scale with the same mine water as well as different mine water.

Bibliographic Information