Abstract
Partial denitrification granules (PDG) offer a novel approach to supplying nitrite (NO 2 − ) for anammox. Shear stress (τ) induced by mechanical stirring has been recognized as an effective operational strategy for enhancing mass transfer in continuous-flow PDG systems with minimal gas production. However, the effects of shear stress intensity on nitrite (NO 2 − ) accumulation, granular structure, and microbial succession remains unclear. This study established two continuously up-flow PDG systems to assess the influence of low-strength τ (0.2–0.5 Pa) and high-strength τ (1.2–1.4 Pa) on PDG performance under dynamic nitrate (NO 3 − ) loading rates (NLR). Results indicated that low-strength τ promoted the formation of 1–2 mm granules, mitigating the washout of flocs and smaller granules, and sustaining a stable nitrite production rate (NPR) of 7.7 kg N/m 3 ·d) at an NLR as high as 11.7 kg N/(m 3 ·d). In contrast, high-strength τ caused particle fragmentation and reaggregation, accompanied by the washout of sludge containing PD bacteria, leading to a lower NPR of 0.2 kg N/(m 3 ·d). Metagenomic analysis revealed that low-strength τ enhanced nitrogen-carbon metabolism, with Thauera. sp. and Thauera _phenylacetica synergistically driving NO 2 − accumulation. Although high-strength τ promoted the enrichment of Thauera (∼70%), Thauera. sp. decreased its contribution to napA and improved to nirK , whereas Thauera _phenylacetica reduced its contribution to napA , thereby constraining NO 2 − accumulation. These findings provide critical insights into optimizing shear conditions for PDG and enhance the understanding of the metagenomic mechanisms of PD.