Abstract
For the last five decades, a number of overflow stepped chutes were built because the staircase shape is conducive to reduced construction costs and increased rate of energy dissipation. The stepped chute operations are characterised by air‐water flows that are highly turbulent flows with a large rate of energy dissipation, in comparison to smooth chutes. Herein, physical measurements were performed in a large‐size 1 V: 0.80H stepped chute model, with a steep slope typical of modern concrete gravity dams. The results are compared to visual observations of prototype spillway operation under Froude similar conditions. The detailed two‐phase flow measurements were conducted to characterise finely the self‐aeration and air diffusion process downstream of the inception region of free‐surface aeration. The bubble count rate profiles scaled with the instantaneous void fraction variance, and the relationship was biased close to the stepped invert under the influence of large‐scale vortical structures. The rate of energy dissipation was carefully estimated based upon the two‐phase flow measurements and the results are compared to earlier results on similar steep invert slopes and prototype data estimates. At the downstream end of the stepped chute, the rate of energy dissipation ranged from 43 to 46%, i.e. more than twice that on a smooth-invert chute for a similar chute length and discharge range. Graphical abstract Characteristics of self-aerated stepped chute flows for dc/h = 1.3—(I) Prototype flow at Hinze Dam (Re = 4.0 × 107); (II) Air-water flow properties in the large-size laboratory model (1:15) stepped spillway (Re = 6.1 × 105)