Journal Article
The influence of various chemical oxygen demands on microbial fuel cells performance using leachate as a substrate
Aliyu Ishaq; Mohd Ismid Mohd Said; Shamila Binti Azman; Mohammed Rajab Houmsi; Abubakar Sadiq Isah; Zainab Toyin Jagun; Shamsuddeen Jumande Mohammad; Al−Amin Danladi Bello; Umar Alfa Abubakar
Environmental Science and Pollution Research · Vol. 32, Issue 48 · pp. 27467-27482 · 2024
Abstract
Microbial fuel cells (MFCs), hailed as a promising technology, hold the potential to combat various wastewater pollutants while simultaneously converting their chemical energy into electricity through biocatalysts. This study explores the applicability of a dual compartment MFC (DC-MFC) under varying conditions, targeting the removal of chemical oxygen demand (COD) from landfill leachate and electricity generation. In this setup, anaerobic sludge from a wastewater treatment plant serves as the inoculum in the anode compartment of the MFC, with a Nafion117 membrane acting as the separator between MFC units. The cathode compartments are filled with distilled water and continually aerated for 24 h to enhance air supply. The study assesses the MFC’s performance across different COD concentrations, focusing on COD removal, power generation, and Coulombic efficiency. The findings reveal that COD removal efficiency is notably enhanced at higher concentrations of organic matter. Specifically, at a COD concentration of 3325.0 mg L −1 , the MFC exhibited the highest COD removal efficiency (89%) and maximum power density (339.41 mWm −2 ), accompanied by a Coulombic efficiency of 25.5%. However, as the initial substrate concentration increased to 3825 mg L −1 , the efficiency decreased to 72%, with a Coulombic efficiency of 13.56% and a power density of 262.34 mWm −2 . Optical density levels increased due to bacterial growth at ambient temperature and neutral pH, reflecting the dynamic microbial response within the system.