Study on wind–temperature coupling effects of a long-span suspension bridge in a complex mountainous canyon based on WRF–CFD - Lei Luo; Zhijia Li; Baojie Lu; Zhen Zhang; Yanling Liu; Bing Zhu (Engineering Structures, 2026)

Experimental study on the seismic performance of precast RC column base joints with replaceable multi-component energy-dissipating devices - Dehao Qiao; Jinjie Men; Tao Lan; Zhiyong Zhang; Yanxin Wang; Jingbo Zhao (Engineering Structures, 2026)

Programmable nonlinear response in spatially varying continuous-fibre lattices: Experimental and numerical investigations - Abhilash Sreekumar; Amin Farrokhabadi; Hossein Toozandehjani; Shahram Hosseini; Dimitrios Chronopoulos (Engineering Structures, 2026)

Design and performance evaluation of a bio-inspired multilayer helmet liner for rotational impact mitigation - Bing Leng; Jing Yi Heng; Shanqing Xu; Yizhao Li; Dong Ruan; Kwong Ming Tse (Engineering Structures, 2026)

Service-life extension of cantilevered traffic signal structures with aerodynamic damping retrofit - Nayan Deep Tiwari; Alice Alipour; Partha Sarkar (Engineering Structures, 2026)

Surrogate assisted optimization of S-type shape memory polymer lattice metastructures for enhanced energy absorption and recovery - Shahram Hosseini; Alireza Pirhaji; Mohadeseh Hosseinzadeh; Amin Farrokhabadi (Engineering Structures, 2026)

Experimental dynamic progressive collapse assessment of post-and-beam mass timber substructures with two-bay cross-laminated timber floors under interior column removal - Nikshan Amatya; Benoit P. Gilbert; Hong Guan; Chuen Yie Lo; Minghao Li; Frank Lam (Engineering Structures, 2026)

Effect of fatigue performance of different metal cladding systems on damage-equivalent cycles in dynamic wind-uplift testing - Ze Wang; Min Liu; Qingshan Yang; Shaodong Fang; Honghao Zhang; Nufeng Nie; Jianjun Li; Junjie Zhou (Engineering Structures, 2026)

Effects of sustained eccentric loading on concrete-encased concrete-filled steel tubular (CFST) columns - Zhi-Cheng Yang; Di Fan; Guan-Yuan Zhao; Li Zhu; Lin-Hai Han; Chen-Yu Zhang (Engineering Structures, 2026)

Bistable cosine-beam metamaterials with central-mass programming for tunable mechanical energy absorption and low-frequency elastic-wave bandgaps - Y.C. Chen; W. Zhang; Y.F. Zhang (Engineering Structures, 2026)

Temperature-influenced deformation analysis of a full-scale steel-concrete-steel cable support tower model during construction - Zhi-Li Qi; Wei-Le Chen; Jian Li; Jian-Sheng Fan; Rong Xian; Fei Tian; Yu-Fei Liu (Engineering Structures, 2026)

Deep learning based reconstruction of particle reinforced materials from wave measurements - Sheng Sang; Eric Johnson (Engineering Structures, 2026)

A two-tier SHM framework for nonlinear identification of friction pendulum isolators in base-isolated buildings - Livia Fabbretti; Eleni Chatzi; Filippo Ubertini; Marco Breccolotti (Engineering Structures, 2026)

Safety assessment of wind-vehicle-bridge system based on probabilistic time-series and interval prediction with informer model - Mengxue Yang; Siyu Zhu; Yongle Li; Xinyu Xu (Engineering Structures, 2026)

Anti-overturning stability assessment of girder bridges: Machine learning-based key parameter identification and load-carrying capacity prediction - Zuqian Jiang; Chaolin Song; Jiaji Wang; Yutao Guo; Bin Sun; Rucheng Xiao (Engineering Structures, 2026)

Tension performance of bimetallic plates with wire arc additively manufactured ER316L stainless steel cladding deposited on S355 carbon steel substrate - Xuanlu Shi; Yannan Jing; Qianzhi Chen; Man-Tai Chen; Ou Zhao (Engineering Structures, 2026)

Editorial Board (Engineering Structures, 2026)

Experimental and analytical investigations of composite girders with CSW-CFST chord-UHPC slab under impact loading - Wei Xian; Shuang-Shuang Li; Wen-Da Wang; Yan-Li Shi; Wei-Hong Wu; Wensu Chen (Engineering Structures, 2026)

Seismic performance evaluation of a viscoelastic self-centering braced frame: A shake-table test study - Honghao Bai; Yi Xiao; Ying Zhou; Haoran Xu; Wenbo Tian (Engineering Structures, 2026)

Experimental and numerical investigation on the long-term performance of unbonded post-tensioned glulam beams - Yuxuan Wang; Frank Lam; Minjuan He (Engineering Structures, 2026)

Full-scale test and numerical study on seismic performance of double-sided superimposed shear walls with vertical UHPC slits in nuclear power plants - Kun Wang; Xiaoye Bai; Sen Yang; Wenfu He; Tao Wang (Engineering Structures, 2026)

Cyclic tension-compression behaviour of concrete-filled steel tubular (CFST) columns under concentric axial loads - Shichao Yan; Yong Fang; Hua Yang; Yuyin Wang (Engineering Structures, 2026)

Co-optimization of cross-domain enhancement and frequency-domain decoupling: An engineering-oriented framework for underwater dam crack detection - Chuan Lin; Rongfeng Liu; Weiwei Lin; Rong Xiao; Yan Su (Engineering Structures, 2026)

Aerostatic stability-driven aero-structural optimization of bridges - Miguel Cid Montoya; Santiago Hernández (Engineering Structures, 2026)

Failure mechanisms and performance assessment of transmission tower-line systems under earthquake and strong wind loads - Qingtong Jin; Li Tian; Juncai Liu; Ran Zhang (Engineering Structures, 2026)

Numerical study and seismic design of T-shaped internal diaphragm-strengthened steel-concrete composite joints based on shear failure modes - Jichun Liu; Rui Cheng; Yuhang Wang; Chao Hu; Yusen Liu (Engineering Structures, 2026)

Gradient design in additively manufactured ceramic triply periodic minimal surface structures for enhanced mechanical performance - Ke Zhong; Yiming Li; Zhiguo Wang; Yuhui Zhao; Jianfeng Chen; Jibin Zhao (Engineering Structures, 2026)

Train-induced vibration amplitude extraction of railway bridges based on monitoring structural responses - Yuan-Zheng Liu; Ting-Hua Yi; Dong-Hui Yang; Hong-Nan Li; Hua Liu (Engineering Structures, 2026)

Energy absorption and structural optimization of plum multi-cell tubes with origami - Yue Zhou; Minsi Ji; Shuo Han; Zhuangzhuang Li; Zonglai Mo; Jun Li (Engineering Structures, 2026)

Shutdown orientation induced load transfer and risk redistribution in a floating vertical-axis wind turbine under extreme wind and wave conditions - Wangxian Yu; Haoda Huang; Qingsong Liu; Minnan Yue; Musa Bashir; Gregorio Iglesias (Engineering Structures, 2026)

Impact of permeability on the structural response of mid- and high-rise RC wall buildings under sequential earthquake-tsunami loading - Javier Nebrijo; Rosita Jünemann; Tiziana Rossetto (Engineering Structures, 2026)

Editorial Board (Engineering Structures, 2026)

Mechanisms and comfort optimization of human–vehicle–bridge coupled vibrations in separated-layer bridges - Tailei Chen; Liming Zhu; Shiling Xing; Zhiwei Xu; Zhenkang Hua (Engineering Structures, 2026)

Editorial Board (Engineering Structures, 2026)

Interpretability of structural seismic response time-series prediction based on neural Granger causality: Application to electrical equipment - Renpeng Liu; Qiang Xie; Xinzhu Qiao; Gaoyang Shi (Engineering Structures, 2026)

Fractional viscoelastic dampers for the passive control of MDOF systems under seismic excitation - Matteo Mazzeo; Giuseppe Ricciardi; Mario Di Paola (Engineering Structures, 2026)

Seismic behavior of corrosion-damaged reinforced concrete columns retrofitted using FRP mesh–ECC composite - Chenchen Li; Hao Huo; Ao Yang; Ke Bi; Guohua Song; Kuangyu Dai; Xiaohui Yu (Engineering Structures, 2026)

Deep learning-based metamodeling of nonlinear stochastic dynamic systems under parametric and predictive uncertainty - Haimiti Atila; Seymour M.J. Spence (Engineering Structures, 2026)

Structural performance of fiber-reinforced SCC one-way bridge deck slabs reinforced with basalt FRP bars - Eman Ibrahim; Ahmed E. Salama; Abdoulaye Sanni Bakouregui; Ammar Yahia; Brahim Benmokrane (Engineering Structures, 2026)

Long-term bending performance degradation of GFRP bar-seawater sea sand concrete beams in marine environments: from material degradation to component response and bearing capacity model correction - Guanghao Mai; Zhe Xiong; Haoran Zhou; Lingfeng Zhou; Xiaohui Li; Feng Liu; Lijuan Li (Engineering Structures, 2026)

Eccentric compression behavior of filament-wound GFRP-steel composite tube-confined ultra-high strength concrete short columns - Yu He; Lianguang Wang; Chunyao Hu; Bailing Chen (Engineering Structures, 2026)

Interface-controlled hygrothermal-fatigue degradation of hybrid FRP prestressing strands: Experiments, molecular dynamics, and Bayesian factor inference - Yue Liu; Kangxin Sun; Mingyang Xi; Lik-Ho Tam; Yize Li; Renyuan Qin; Yue Wang (Engineering Structures, 2026)

Adaptive deflection control of beams using hybrid tendons with shape memory alloys - Adoum Waibaye; Khaoula Idrissa; Jean-François Destrebecq; Xavier Balandraud (Engineering Structures, 2026)

Wind pressures on macro-corrugated low-rise building envelopes: Effect of corrugation depth - Arezoo Bakhshizadeh; Peter Tsouroukdissian; Qian Zhang; Pedro L. Fernández-Cabán (Engineering Structures, 2026)

Numerical prediction of debris loads on underground structures following progressive collapse of multi-story buildings - Marcin Nowak; Franciszek Wołoch; Zuzanna Lewandowska; Tomasz Gajewski; Krzysztof Szajek; Piotr Sielicki (Engineering Structures, 2026)

Hybrid pseudo-force method for the stochastic analysis of fractional-damper-connected structures subjected to non-stationary random excitations - Federica Genovese; Giuseppe Muscolino (Engineering Structures, 2026)

Fire behavior and high-temperature vertical load-bearing capacity of cold-formed steel center-sheathed shear walls - Yonghui Xing; Fengliang Zhang; Zhongqi Shi; Qingrui Yue; Ou Zhao; Yuzhou Liu; Weiyong Wang (Engineering Structures, 2026)

Deep learning-based temperature-induced bearing displacement prediction and anomaly warning for a high-speed railway cable-stayed bridge - Liangwei Jiang; Pengcheng Yin; Yongyi Yan; Jinjing Xu; Dongming Feng (Engineering Structures, 2026)

A novel hierarchical importance sampling method guided by bidirectional hybrid sampling for efficient failure probability function estimation - Yizhou Chen; Zhenzhou Lu; Haipeng Zhang; Yifan Guo (Engineering Structures, 2026)

Research on design and applications of multistable mechanical metamaterial structures with high fatigue resistance - Song Gao; Meiling Zhang; Lang Yu; Jinkui Chu; Jianwei Sun; Luquan Ren (Engineering Structures, 2026)

Bending behaviour of cementitious composite beams reinforced with 3D-printed TPMS geometries - Vuong Nguyen-Van; S. Sankeeth; Nabodyuti Das; Bao-Loi Dang; Y.X. Zhang; Meiling Dai (Engineering Structures, 2026)

Out-of-plane bending behavior of SHS-to-CHS and H-to-CHS X-joints - Bida Zhao; Chao Sun; Shenyi Zhou; Wenkai Wang; Zhenzhe Huang; Tao Shi (Engineering Structures, 2026)

Experimental investigation on aerodynamic optimization for a square-cylinder structure using passive-rotating vertical axis wind turbines - Xin Liu; Feng Xu; Zhongdong Duan; Jinping Ou (Engineering Structures, 2026)

In-plane buckling and strength of pined-end steel arches with local corrosion - Xinhao Han; Qing Hu; Puyuan Liu; Chenyang Wei; Changyong Liu; Chen Jia (Engineering Structures, 2026)

Corrigendum to “Experimental investigation on prevalent local failure mechanisms in hard rock tunnel linings using distributed optical fibre sensors” [Eng Struct 333 (2025) 120185] - August Jansson; Andreas Sjölander; Carlos G. Berrocal; Rasmus Rempling; Ignasi Fernandez (Engineering Structures, 2026)

A general time-domain framework described by time-varying impulse response functions for modeling 3-DOF coupled nonlinear self-excited forces on bridge decks - Bangrong Yuan; C.S. Cai; Kai Li; Xu Chen; Peng Hu; Chao Jiang; Yan Han (Engineering Structures, 2026)

Temperature effects on probabilistic seismic fragility of isolated bridges with high damping rubber bearings under mainshock-aftershock sequences: Intensity measure optimization - Jie Shen; M. Shahria Alam; Saqib Khan; Jian Zhou (Engineering Structures, 2026)

Dynamic graph learning for forecasting coupled winds in twin tower structures during typhoons - Hang Du; E Deng; Yue Dong; Ying Zhong; Jia-Hao Huang; Yi-Qing Ni (Engineering Structures, 2026)

Cross-section behaviour and CSM based design of stainless steel I-sections in fire - Congding Zhang; Merih Kucukler; Zhe Xing (Engineering Structures, 2026)

Cracking risk assessment of high arch dam under abnormal abutment deformation during long-term operation - Yi Li; Yunan Teng; Xianghua Wu; Erfeng Zhao; Chenfei Shao; Ming Chen; Sidian Yin; Yixiang Fang (Engineering Structures, 2026)

A dual mechanical tuning framework for rigid pillared elastic metamaterials: Geometric reconfiguration and controllable prestress - Zu Shao; Tong Cheng; Yi Zhang; Wei Zhong Jiang; Zhu Kun Mi; Xiang Jie Wei; Xin Guo; Wang Lin Xiong; Kai Hao Lin; Chuang Li; Shu Hao Song; Cheng Shen; et al. (Engineering Structures, 2026)

Experimental behaviour of steel-timber composite (STC) stub columns with cruciform steel core under axial compression - Jiahao Peng; Xinxiang Liang; Chao Hou; Huu-Tai Thai (Engineering Structures, 2026)

Field blast testing of reinforced concrete column prototype based on the existing overpass design - Hrvoje Draganić; Goran Gazić; Sanja Tokić; Ivan Radić; Mario Jeleč (Engineering Structures, 2026)

Flexural performance and calculations of concrete-encased square concrete-filled steel tubular (CFST) hybrid structures - Dan-Yang Ma; Jie Gong; Lin-Hai Han; Long-Hui Du (Engineering Structures, 2026)

Unified bending analysis of plates via a data-free physics-informed neural network - Zhaoyang Hu; Lin Zhang (Engineering Structures, 2026)

Identification of nonlinear aerodynamic damping based on LSTM-modified unscented Kalman filter - Shaopeng Li; Peng Wang; Qingshan Yang; Yanchi Wu; Hao Meng; Donglai Gao; Wenli Chen (Engineering Structures, 2026)

Seismic modeling of GFRP-reinforced concrete members including strain penetration effects - Seyed Mohammad Hosseini; Romina Chalabi; Yazhou Xie; Yi Shao (Engineering Structures, 2026)

Seismic performance test and numerical analysis of a full-scale historic timber frame reinforced with viscoelastic dampers - Duhang Yi; Zheng Li; Yi Pan; Jiacong Yuan (Engineering Structures, 2026)

Structural behavior of steel-timber composite beams with mass plywood panels and self-tapping screw shear connections - Brendan P.H. Deeves; Joshua E. Woods (Engineering Structures, 2026)

Vertical failure modes and residual vertical load-carrying capacity of post-earthquake RC bridge piers - Chao Wang; Huihui Dong; Xiuli Du; Qiang Han; Zhenhua Dong (Engineering Structures, 2026)

Estimation of wind-induced nonstationary buffeting loads and states for long-span bridges - Sixiang Wen; Fei Wang; Genshen Fang; Yong Xia; Yaojun Ge (Engineering Structures, 2026)

Generalizable structural behavior modeling with synthetic pretrained tabular transformer network for dam health monitoring - Shun Qin; Qiubing Ren; Mingchao Li; Yantao Yu; Yingbo Chen; Rui Kong (Engineering Structures, 2026)

Inverse design of multi-frequency bandgaps for multi-modal vibration control in long-span bridge cables - Chun-Sheng Lu; Chun-Xu Qu; Ting-Hua Yi; Hong-Nan Li (Engineering Structures, 2026)

Seismic resilience mechanism of rocking piers: Theoretical derivation and probabilistic-based failure control - Boyu Guo; Jin Guo; Tianyi Wang; Wei Zhang; Haiyang Pan (Engineering Structures, 2026)

Experimental and numerical investigation of axial hysteretic performance in corroded T-joints - Qi Si; Yang Ding; Liang Zong (Engineering Structures, 2026)

Seismic rehabilitation of severely earthquake-damaged ductile RC T-shaped beams using mechanically anchored CFRP strips: Anchorage requirements and experimental validation - Chien-Kuo Chiu; Yi-Feng Lin; Hsin-Fang Sung; Lung-Cheng Hsieh (Engineering Structures, 2026)

Axial compressive performance of thin-walled T-shaped concrete-filled steel tubular stub with angle stiffeners - Lanhui Guo; Xiang Qiu; Shan Gao; Ashyu R.C.; Zhenhua Huang (Engineering Structures, 2026)

Fatigue assessment of heavy-thick welded T-joint improved by portable pneumatic needle-peening treatment - Xipeng Chen; Naoki Osawa; Sherif Rashed; Takaaki Takeuchi; Donghui Ma; Jun Okada; Masahito Honnami (Engineering Structures, 2026)

Probabilistic modeling of extraordinary loads in buildings using big data-driven stochastic simulation: Methodology, applications, and extreme value analysis - Wenhan WU; Hao ZENG; Yang LI; Jiachen ZHANG; Jun CHEN (Engineering Structures, 2026)

Vulnerability assessment of high-rise glass curtain walls under wind loads with building interference effects - Qiang Zhou; Jin Wang; Qiaosong Li; Jialin Zhang; Dongchen Jin (Engineering Structures, 2026)

Experimental investigation of passive gyro stabilizers for pitch motion control of a 15-MW spar floating offshore wind turbine - Junlei Wang; Haoran Li; Haoran Zuo; Jisheng Zhang; Dawei Guan; Wensu Chen; Haoyu Li (Engineering Structures, 2026)

A unified rate-dependent rheological model for high damping rubber bearings: Seismic performance assessment in cold climates - Fubao Guo; Junho Song; Yanhui Liu; Jongha Joo; Jaehwan Jeon (Engineering Structures, 2026)

Lateral torsional buckling analysis of strengthened timber beams - Youssef Magdy; Magdi Mohareb; Sherif A. Mourad; Saher Attia (Engineering Structures, 2026)

Operational Modal Analysis from multi-setup measurements with roving references and Stochastic Subspace Identification - Samuel González-Jiménez; Luis A. Padrón; Guillermo M. Álamo; Jacob D.R. Bordón (Engineering Structures, 2026)

Corrosion-triggered response transition in impact-loaded RC beams: SPH-FEM modeling with corrosion expansion pre-damage - Ziqi Gao; Chi Lu; Yoshimi Sonoda; Hiroki Tamai (Engineering Structures, 2026)

Fatigue performance of electrical insulator bolted connection with an unintended gap - Shiroshi Jayathilake; Pathmanathan Rajeev; Saman Fernando; Emad Gad (Engineering Structures, 2026)

Cable vibration measurement based on UAV and improved Lucas-Kanade optical flow method - Kui Luo; Hailong Deng; Xuan Kong; Jiexuan Hu; Hong Zhang; Xugang Hua (Engineering Structures, 2026)

Study on surface morphology characteristics and tensile properties of non-uniformly corroded stud connectors - Yachuan Kuang; Kui Wang; Zhiwei Peng; Wenjun Li; Tianyu Wang; Huan Chen; Han Ling; Yushuo Hu (Engineering Structures, 2026)

Experimental study on mechanical properties of Q690 high-strength steel T-stub joints in coastal atmospheric environment - Huanhuan Wei; Yiqun Tang; Yao-Peng Liu; Siu-Lai Chan (Engineering Structures, 2026)

Anti-progressive collapse performance analysis and enhancement of cold-formed steel framed substructure - Bao Meng; Lei Liu; Qing Yuan; Guokai Chen; Limin Tian (Engineering Structures, 2026)

Seismic performance of modular steel buildings with a composite strengthening system incorporating grouted connections and modular composite columns - Tian Jin; Shuangshuang Jin (Engineering Structures, 2026)

Experimental investigation on precast spiral reinforcement lightweight aggregate concrete confined normal concrete columns under eccentric compression - Weisheng Xu; Zongping Chen; Ying Liang; Fan Ning (Engineering Structures, 2026)

Accuracy analysis of membrane antennas considering prestress and structural clearance - Dongtian Wu; Hui Yang; Yan Wang (Engineering Structures, 2026)

Design scheme for high-performance and environment-oriented composite beams with puzzle-shaped shear connectors under cyclic loading - Atsushi Suzuki; Ruiyu Che; Takeru Niihori; Maciej Kożuch; Piotr Kozioł; Yoshihiro Kimura; Wojciech Lorenc (Engineering Structures, 2026)

Hysteretic behavior of InorgBam-steel composite columns under cyclic loading - Ernian Zhao; Wende Zhang; Fei Wang; Bingqing Dong; Qiaoling Liu; Xin Zhang (Engineering Structures, 2026)

From uniform reliability to uniform failure risk in seismic design: A framework consistent with EN 1998–1-1:2024 - Giorgio Monti; Christina El Moussawi; Raihan Rahmat Rabi (Engineering Structures, 2026)

The ellipsoidal head of a multi-bubble pressure tank: Concept and principles - Joren Malfroy; Johan Steelant; Dirk Vandepitte (Engineering Structures, 2026)

Experimental and analytical investigation of 6-panel frameless cold-formed steel corrugated wall system subjected to in-plane loads - Atsushi Suzuki; Yu-Cheng Hsu; T.Y. Yang (Engineering Structures, 2026)

Continuous quantum-inspired multi-objective optimization for robust structural damage identification under temperature variations - Zhiyu Zhang; Zhenghao Ding; Zepeng Chen; Qitian Liu (Engineering Structures, 2026)

Free vibration of rotating origami-inspired folded graphene-reinforced copper twisted cylindrical curved plate - W.B. Wang; Y.X. Hao; H. Li; Y.T. Cao (Engineering Structures, 2026)

Simplified modeling of inter-module connections with combined load interactions in modular steel construction - Jun-Yi Lian; Wen-Yuan Zhang; Yu-Kun Ding; Joshua Adriel Mulyanto; Yifan Zhou; Andrew William Lacey; Wensu Chen (Engineering Structures, 2026)

Residual stress model for hot-rolled steel I-sections - Lahiru N. Dissanayake; Jiachi Yang; Fiona Walport; Leroy Gardner (Engineering Structures, 2026)

Nonlinear vibration suppression of elastically restrained GPL-reinforced porous nanocomposite beams using an inertial nonlinear energy sink - Ning Lyu; Hao Sun; Jie Chen (Engineering Structures, 2026)

Vibroacoustic analysis of graphene platelet–reinforced metal foams cylindrical shells coupled with annular plates - Yi Liu; Yan-Chang Zheng; Yang Bu; Yat-Sze Choy; Meng-Xin He; Qian Ding; Ye Tang (Engineering Structures, 2026)

Seismic retrofit of masonry walls using engineered cementitious composites: Experimental insights, numerical modeling, and design recommendations - Fangyuan Dong; Yunzhu Chen; Jiangtao YU; Yiyi Zhou; Kequan Yu (Engineering Structures, 2026)

Performance analysis of long-span arch bridges against transversal fault rupture within fault-dislocation influence zones using multi-scale modeling - Hongyu Jia; Bangwen Jiang; Li Xu; Yihua Li; Huaisheng Ruan; Kailai Deng (Engineering Structures, 2026)

Experimental study of size effect on shear-controlled hollow clay brick unreinforced masonry walls under in-plane shear-compression loading - Ernesto Inzunza Araya; S. Saloustros; K. Beyer (Engineering Structures, 2026)

A TCN-PatchTST framework for efficient reconstruction of missing acceleration data in bridge structural health monitoring - Yuecheng Yang; Dongming Feng; Yichao Xu (Engineering Structures, 2026)

Shear capacity prediction and influence of a/d ratio, horizontal web reinforcement ratio and size of openings in RC deep beams - A. Rajprabhu; G. Appa Rao (Engineering Structures, 2026)

Seismic retrofit of corroded RC columns using textile reinforced UHTCC jackets and near-surface-mounted BFRP bars - Zikai Liu; Lijun Hou; Zhipeng Wu; Shiping Yin; Da Chen (Engineering Structures, 2026)

Wind-induced coupled lateral-torsional response of tall buildings using bidirectional tuned mass damper inerter - Iván F. Huergo (Engineering Structures, 2026)

Flexural behavior and stability of continuous composite beams using NSS and HSS castellated I-sections and slabs of NSC and UHPC - Vinicius Moura de Oliveira; Vinicius Brother dos Santos; Alexandre Rossi; Luciano Rodrigues Ornelas de Lima; Carlos Humberto Martins (Engineering Structures, 2026)

Brittle failure in steel-to-timber connections with rebar off-cuts: Experimental, analytical, and numerical assessment - Yue Wang; Caroline D. Aquino; Roberto Crocetti; Michael Schweigeler; Tianxiang Wang; Dong Yang; Angelo Aloisio (Engineering Structures, 2026)

Moving mass-induced transient response of functionally graded and functionally graded graphene nanoplatelet-reinforced composite curved beams via quasi-3D finite element analysis - Sang D. Pham; Armagan Karamanli; Son Thai; Thuc P. Vo (Engineering Structures, 2026)

Experimental validation and surrogate-assisted evolutionary optimization on polyline-based core sandwich structures - Xintong Wu; Guanguan Sun; Zan Yang; Yuhang Chen; Lin Zhu; Junwei Long; Haobo Qiu (Engineering Structures, 2026)

State-dependent seismic evaluation and fragility analysis of vaulted bi-layered reticulated spatial shells - Moein Mirzaei; Mohammad Kheirollahi; Bartolomeo Pantò (Engineering Structures, 2026)

Finite element modeling of post-tensioned concrete beams with grout defects and evolution of strand corrosion in time - Marialorenza Vescovi; Daniele Ferretti; Beatrice Belletti (Engineering Structures, 2026)

Dynamic reliability analysis of high earth-rockfill dams under non-stationary and non-Gaussian ground motions using an L-moment-based simplified quintic HPM - Haoyu Yao; Mingyang Xu; Dianjun Zhu; Rui Pang; Bin Xu; Jun Liu (Engineering Structures, 2026)

Data-driven prediction and interpretable analysis of shear capacity in PBL connectors - Yixing Tang; Wen-Wei Wang; Yi Cheng; Zenghan Wu; Kai Guo; Mingli Zhou; Hui Shen (Engineering Structures, 2026)

Staircase Cascaded Fusion of lightweight local pattern recognition and long-range dependencies for structural crack segmentation - Hui Liu; Chen Jia; Fan Shi; Xu Cheng; Mianzhao Wang; Shengyong Chen; Yang Lv (Engineering Structures, 2026)

Rubik’s cube inspired magnetic array with high-efficiency negative stiffness for space-constrained quasi-zero-stiffness vibration isolation - Minrui Zhou; Yong Xiao; Yongqiang Li; Xiaolong Zeng; Mingrui Li (Engineering Structures, 2026)

Performance evaluation of novel inerter-based vibrating barrier configurations - Predaricka Deastra; Hakan Dogan; Ruihong Xie; Marco Domaneschi (Engineering Structures, 2026)

Comparative evaluation of fan anchor and NSM–CFRP retrofits for slip mitigation in flexure–critical substandard RC columns - Özgür Yurdakul; Bohumil Culek; Ladislav Routil; Özgür Avşar (Engineering Structures, 2026)

Fire tests on RC columns jacketed by FRP with a silicon-based matrix - Mohamed Elshorbagi; R.S. Krishna; Zhong Tao; Cheng Jiang (Engineering Structures, 2026)

A progressive multi-objective optimization framework for synergistic seismic resilience enhancement of buildings - Binbin Hu; Shuang Li; Jianjun Zhao; Changhai Zhai (Engineering Structures, 2026)

Conditional and non-conditional predictive models for inelastic displacement demands based on machine learning - Mao-Xin Wang; Gang Wang; Yuan Tian (Engineering Structures, 2026)

Time-dependent stiffness degradation of corroded stud connectors in steel-concrete composite bridges with typical defects - Jiancheng Gu; Chen Li; Mengxin Xue; Wenqin Deng; Yuguang Fu; Xinhao He (Engineering Structures, 2026)

Flexural behavior of large-scale FRP–UHPC–steel double-skin tubular beams - Dong Chen; Xuefei Nie; Jing Tian; Shishun Zhang (Engineering Structures, 2026)

Multi-stage mechanical responses of 3D printed body-centered cubic lattice metamaterials: Experiments, finite element analysis and machine learning - H.X. Jia; J.D. Wei; Y. Cai; P.P. Shi; L. Lu; J.Y. Hua; N.B. Zhang; S.N. Luo (Engineering Structures, 2026)

Finite element analysis and hysteretic behavior of self-centering CFST pier with bottom energy-dissipation encasement - Xuanding Wang; Yuao Mi; Jiaxuan Cao; Yuan Liu; Kwok-fai Chung; Xuhong Zhou (Engineering Structures, 2026)

A stress discontinuity approach for the assessment of reinforced concrete interior beam-to-column joints - Melina Bosco; Pier Paolo Rossi (Engineering Structures, 2026)

Experimental investigation of cross-laminated timber panels subjected to near-field blast loads - Mehdi Saloo; Christian Viau (Engineering Structures, 2026)

Multi-objective optimization of seismic upgrading interventions in existing RC buildings - Giulia Angelucci; Giuseppe Quaranta (Engineering Structures, 2026)

Marker-free mobile inspection system for bridge apparent cracks: Fusing vision and low-cost triple-laser module for high-precision localization and quantification - Danhui Dan; Jinnan Hu; Qiang Dan; Liangfu Ge; Yi Bao; Ayan Sadhu (Engineering Structures, 2026)

Shear strengthening of reinforced concrete beams using engineered/ strain-hardening cementitious composites (ECC/SHCC): A state-of-the-art review - Mohammed F. Sheta; Mohamed H. Mowafy; Asad Hanif (Engineering Structures, 2026)

Statistical condition assessment of railway bridges based on influence lines from repeated train passages - Zhihang Wang; Jiawang Zhan; Zhen Ni; Lizhong Wu; Jianlei Liu; Zhipeng Lu (Engineering Structures, 2026)

Structural implications of perforation layout and boundary restraint in pretensioned GFRP-reinforced perforated deep beams - Husam Farghal; Antonio Nanni (Engineering Structures, 2026)

Load transfer mechanism of Chuan-Dou style timber structures at different damage states based on digital image correlation - Hao Wang; Baitao Sun; Xiangzhao Chen; Xianwei Wang; Ke Wei; Yiping Wang; Menghan Sun (Engineering Structures, 2026)

A multi-support response spectrum method for response prediction of large-dimensional structures under spatially varying earthquake ground motions - Haimei Ling; Hong Hao; Kaiming Bi (Engineering Structures, 2026)

Simplified tying-bending model for robustness assessment of floor systems under corner column loss - João Sio; Abdellatif Saleh; Bassam A. Izzuddin (Engineering Structures, 2026)

Advanced multi contact-point detection of bridge modal parameters using a two-axle test vehicle: From theory to experiment - Y.B. Yang; X.G. Chen; Hao Xu; J. Chen; L.K. Shi; Y.Z. Liu (Engineering Structures, 2026)

Bio-inspired 3D printed SHCC (3DP-SHCC) porous lattice walls for enhanced compressive performance - Guoqiang Du; Yan Sun; Ye Qian (Engineering Structures, 2026)

Long-duration blast loading effects on two square columns with varying arrangements - Tao Qiu; Xiaoqing Du; Hao Wu; Liangliang Ma (Engineering Structures, 2026)

Cyclic response of severely damaged subway station central columns repaired with ECC jackets under highly variable axial loads - Jia Yang; Peng Deng; Chao Zhang; Renpeng Chen; Shiling Pei (Engineering Structures, 2026)

Peak and residual displacement-based design method for enhancing seismic performance of bridge bents retrofitted with BRBs - Yan Shi; Qianzhan Cheng; Jianping Han; Jixin Wang; Yu Ding (Engineering Structures, 2026)

Physical-constraint-guided semi-supervised learning for tile hollow area visualization - Keyan Ji; Linyuan Ma; Qingzhao Kong (Engineering Structures, 2026)

Time-varying evolution mechanism of interlayer damage of ballastless track under tunnel floor heave and long-term train loading based on improved fatigue cohesion - Shuxin Zhao; Yanglong Zhong; Zhihan Zhang; Liang Gao; Yaqin Zhang; Weitao Cui; He Chen (Engineering Structures, 2026)

Laterally restrained stainless steel I-section beams under moment gradients: An experimental and numerical study - Song Su; Zichang Yang; Feng Zhou; Leroy Gardner; Guo-Qiang Li (Engineering Structures, 2026)

Effect of concrete triaxial confinement on the nodal-zone efficiency of concrete deep beams reinforced with GFRP bars - Mohamed Y.A. Abbas; Khaled Mohamed; Brahim Benmokrane (Engineering Structures, 2026)

Experimentally calibrated cold spray additive repair design for capacity restoration of corroded steel girders - Brian Schagen; Catherine H. Chen; Haden Quinlan; A. John Hart; Simos Gerasimidis (Engineering Structures, 2026)

A novel disc-spring-based 3D isolator: Development, experiment, and nonlinear stick-slip modeling - Dingsong Zhou; Peng Chen; Ying Zhou; Yunyang Deng; Kaiqiang Ma (Engineering Structures, 2026)

Experimental study and numerical simulation on seismic performance of a self-centering deformation-amplified torsional steel tube damper - De-bin Wang; Yuan-ke Zhu; Wen-ming Wang (Engineering Structures, 2026)

Experimental study on prestressed precast frames with rocking-lever friction walls - Baoxi Song; Shoutan Song; Xu-Yang Cao; Man Xu; Chun-Lin Wang (Engineering Structures, 2026)

Hybrid nonlinear energy sink for vibration suppression of truss-hinged deployable arms considering locking-device nonlinearity - Tao Peng; Rongqiang Liu; Runchao Zhao; Chuang Shi; Biao Li; Hongwei Guo; Qiang Cong (Engineering Structures, 2026)

A novel finite element model of reinforced concrete beam-column joints considering varying axial load - Xingyu Su; Hong Yang; Junhao Li; Jiulin Bai (Engineering Structures, 2026)

Three-dimensional damage visualization of civil structures via Gaussian Splatting-enabled digital twins - Shuo Wang; Shuo Wang; Xin Nie; Yasutaka Narazaki; Thomas Matiki; Billie F. Spencer (Engineering Structures, 2026)

Toward tailoring vortex synergy for predictive vortex-induced vibrations suppression in bridge girders - Shuaikuang Chen; Chuanxin Hu; Lin Zhao; Wei Cui; Qiang Zhou; Yaojun Ge (Engineering Structures, 2026)

Experimental and numerical investigations on flexural behavior of reinforced concrete slabs with ECC permanent formwork - Jiongyi Zhu; Chenxuan Tan; Haixin Liu; Jun-Jie Zeng (Engineering Structures, 2026)

Corrosion behaviour and residual strength evaluation of the main cables of a suspension bridge - Zhitao Sun; Dongming Feng; Yixuan Zhao; Jieyun Wang; Qiang Yan (Engineering Structures, 2026)

Distributional reinforcement learning for digital twin-driven optimal sensor network configuration in structural monitoring - Yafei Ma; Hao Zhou; Ke Huang; Yu He; Lei Wang (Engineering Structures, 2026)

Laser-PSD based dynamic deflection monitoring of small- and medium-span beam bridges - Chen Xiong; Yingxiu Chen; Chengyu Cen; Yanmei Liang; Liu Mei; Qiling Luo; Wujian Long (Engineering Structures, 2026)

Seismic performance evaluation for base-isolated single-tower cable-stayed bridges with inerter-based vibration absorbers - Yunshan Shi; Jianian Wen; Huan Li; Li Xu; Qiang Han (Engineering Structures, 2026)

An enhanced YOLO-based deep learning framework for automated structural defect inspection in complex backgrounds - Zheyu Liu; Di Su; Youqi Zhang; Da-Wei Lin; Zhen Sun (Engineering Structures, 2026)

Rehabilitation and seismic resilience of prestressed precast frames using replaceable steel buckling-restrained rods - Zhao-Hui Gong; Hai-Bo Fang; Man Xu; Jin Zhang; Chun-Lin Wang (Engineering Structures, 2026)

Strategies for enhancing flexural performance in the main girder of composite girder cable-stayed bridges: Partial and full UHPC slab replacements - Didi Hao; Xiangtao Lu; Rou Li; Xudong Wang; Yuchen Zhang; Chunfeng Wan; Changqing Miao (Engineering Structures, 2026)

An origami-inspired unit cell composed of intersecting Kresling springs - Ahmed S. Dalaq; Ammar Alsheghri; Sabarinathan Palaniyappan; Mohd Tauheed; Rashid K. Abu Al-Rub; Oraib Al-Ketan; Mohammed F. Daqaq (Engineering Structures, 2026)

Multi-level assessment model for steel-UHPC composite girders based on force-carbon synergistic optimization - Yuqing Tan; Hongyi Wang; Jingquan Wang; Qizhi Xu (Engineering Structures, 2026)

Multimodal vibration suppression of stay cables using dual negative stiffness dampers: Experimental and analytical investigations - Zhipeng Cheng; Ruisheng Ma; Zhihao Wang; Huan Li; Xiuli Du; Kaiming Bi (Engineering Structures, 2026)

Robust reconstruction of incomplete train-induced strains using cross-scale pyramidal attention-enhanced UNet - Shunlong Li; Ye Mo; Yapeng Guo (Engineering Structures, 2026)

Shear behavior of steel-UHPC-NC composite girders: Effects of interface treatment and UHPC layer thickness - Jing-Wei Zhu; Li-Wen Wang; Chun-Sheng Wang; Hai-Ting Li (Engineering Structures, 2026)

Study on steel-thin UHPC composite beams with foamed rubber wrapped large diameter short stud under hogging moment - Yang Chen; Zhan Xie; Chaogang Qin; Yong Yang (Engineering Structures, 2026)

Lateral impact performance of concrete-encased concrete-filled steel tubular (CECFST) members after exposure to fire: Tests and analysis - Yuan Zheng; Wen-Da Wang; Sun-Hang Ji; Yan-Li Shi; Wei Xian; Rui Wang (Engineering Structures, 2026)

Experimental study on fatigue performance of circular tubular column-to-H-shaped beam welded and cast steel connections - Fei Xu; Yuanbo Wang; Yun Zhao; Shuai Li; Jielong Zhu; Yongbo Shao (Engineering Structures, 2026)

Tensile stress-strain models for quenched and tempered high-strength structural steels after fire exposure - Xing-Qiang Wang; Zhong Tao (Engineering Structures, 2026)

Failure-mitigation strategies and refined force transfer model in column-drilled shaft sockets: A parametric experimental study - Zeng Zeng; Fabio Freddi; Yan Xu; Zhigang Wang (Engineering Structures, 2026)

Collaborative mechanism of multi-cavity-column steel frame–SPSW structures and energy-based seismic damage analysis - Yaqi Suo; Shenggang Fan; Runmin Ding (Engineering Structures, 2026)

A novel TMD parameter design method for multiple-mode vortex-induced vibration control of bridges characterized by closely spaced modes - Mengfei Huang; Mingjie Zhang; Fuyou Xu (Engineering Structures, 2026)

Self-sensing-based quantitative evaluation of CFRP damage mechanisms with two-dimensional interpretation - So Young Oh; Björn Beck; Frank Henning; In Yong Lee; Young-Bin Park (Engineering Structures, 2026)

Axial compressive behavior of concrete-encased CFST composite columns with different encasement and confinement configurations - Kaiyuan Zuo; Yong Yang; Longkang Xu; Jingnan Zhang; Xijia Feng; Jian Zhou; Huiping Huang; YanPan Sun (Engineering Structures, 2026)

Behaviour of concrete-filled circular TIG-welded aluminium alloy tubes under axial compression - Yong Fang; Mingxuan Li; Qinghua Tan; Shichao Yan; Yuyin Wang; Hua Yang (Engineering Structures, 2026)

Impact behavior of seawater sea-sand concrete beams enhanced with high corrosion resistant bars under marine environments: Experimental study and lifetime prediction - Kai Qian; Shi-hao Wu; Bing Liu; Ting Huang; Yang Ming; Zhi Li (Engineering Structures, 2026)

Large-scale long-term transient topology optimization method based on improved Duhamel integral - Huaiyuan Li; Yingchun Bai; Wei Ji (Engineering Structures, 2026)

Strain-energy–based inverse identification of component damping contributions in a long-span cable-stayed bridge - Mingjin Zhang; Tingyuan Yan; Haochao Wang; Hongbing Liu; Haoxiang Zheng; Jinxiang Zhang (Engineering Structures, 2026)

An artificial neural network-based design framework for direct seismic fragility-based design of steel moment-resisting frames - Hamed Dadkhah; Mahsa Noruzvand (Engineering Structures, 2026)

Temporal image-based hysteretic damage prediction network for semi-rigid PC beam-column joint-connection - Dianyou Yu; Zheng He (Engineering Structures, 2026)

Unified hazard assessment of glazing systems under windborne timber impact: Experiments and numerical modelling - Xiao-Hong Guo; Hong-Bo Li; Yao-Peng Liu; Yun-Tao Jin; Siu-Lai Chan (Engineering Structures, 2026)

A retrofitted structure with novel force-restricted tuned viscous mass dampers (FRTVMDs): Design, testing, and performance assessment - Ruofan Jia; Xiaodong Ji; Tianwei Sun; Lijun Wang; Ming Wang (Engineering Structures, 2026)

Knowledge-guided graph neural network: A code-embedded stress-field learning framework for predicting the fatigue life of corroded welded joints - Kun Tang; Chuang Cui; Xiong Tian; Yan Ma; Qinghua Zhang; Yi Bao (Engineering Structures, 2026)

Prestress optimization of cable-strut tensile structures based on a multi-strategy improved animated oat optimization algorithm - Mingliang Zhu; Shuangyuan Xiao; Jin Wang; Jiamin Guo (Engineering Structures, 2026)

Reliability-based seismic performance assessment of single-pier hybrid coupled walls with hinged base and corner components - Fabrizio Scozzese; Alessandro Zona; Graziano Leoni; Andrea Dall’Asta (Engineering Structures, 2026)

Seismic performance of precast GFRP-reinforced UHPC beam-column joints under cyclic loading - Xinyu Hu; Weichen Xue; Jiang Jiafei (Engineering Structures, 2026)

Experimental and numerical study on flexural performance of GFRP-UHPC composite beams with GFRP bolt shear connectors - Dawei Yan; Weichen Xue (Engineering Structures, 2026)

Efficacy of external guy-wires in reducing wind-induced response of super-tall towers: Experimental and PBWE analyses - Lei Zhang; Luca Caracoglia (Engineering Structures, 2026)

Global stability of equal-limb L-shaped truss-stiffened DSPCWs under axial compression - Yan Lang; Ying Qin; Ganping Shu; Tong Guo; Ke Jiang (Engineering Structures, 2026)

Investigations on the influence of the width-radius ratio of model boundary transition section on the wind tunnel test of mountain-gorge terrain - Yu Li; Xi-Tong Li; Jia-Hao Wang; Jia-Wu Li (Engineering Structures, 2026)

Seismic behavior and design method of a novel high-resilient CFST composite joint with SMA bars and low-yield angle fuses - Minsheng Guan; Jiajun Chen; Dewang Liu; Zhuanqun Liang; Jiaji Wang; Xiangsheng Chen (Engineering Structures, 2026)

A unified stress-strain model for UHPC filled square steel tube with built-in circular or square bamboo scrimber - Baoxing Wei; Yang Wei; Zhuang Zhao; Jiawei Chen; Yi Ding; Zhongling Zong (Engineering Structures, 2026)

Axial behavior and packing-coupled constitutive modeling of FRP-confined steel slag concrete - M.H. Lai; Y.T. Luo; W. Zhong; J.C.M. Ho; S. Kitipornchai; F.M. Ren (Engineering Structures, 2026)

Mechanical performance of an auxetic chiral re-entrant hybrid tubular metamaterial - Ze Hua Gu; Yi Zhang; Xiang Jie Wei; Tao Ding; Xin Guo; Zhu Kun Mi; Yi Ke Wang; Wei Zhong Jiang; Xi Hai Ni; Xin Ren (Engineering Structures, 2026)

Experimental investigation on seismic performance of a new precast segmental self-centering bridge column with varying-strength external dissipators - Lu-Xi Li; Xiao Luo; Zi-Hao Zhang; Chao Li; Hong-Nan Li (Engineering Structures, 2026)